A smooth, dust free edge adaptable
for presentations not requiring tag molding. All Base and Upper
Shelves as well as End Flats have this option.
The Wire Candy Rack for Gondola/Wall
shelving is used to display small boxes of candy, cookies and other
snack items. Attached brackets allow for easy installation in the
Gondola/Wall Uprights. It may be used on either a Base or Upper
The unit is 24” tall, 8”
deep with three shelves top to bottom 4", 5", and 6", respectively.
It is available in 36” or 48” widths with 1” OC wire spacing.
A Potato Chip Gondola consists of
three major components, a double sided island gondola section, or a
single sided wall gondola section, with a standard shelf that can be
mounted on the gondola in a down slope configuration, and a wire
Our Plastic Bottle Slides are an
important component of the Wire Bottle Display Racks. Bottles
slide to the foremost product position whenever a bottle is
removed. The panels are removable from the shelf for easy
Shelf bracket is one position. All
materials and options available are the same as the Standard Upper
Shelves (SUS). Load capacity of 800 lbs. is based on evenly
distributed static loading. A 1/4" tag molding is integrally formed
into the front edge of shelf. Shelves can be used for heavy bags of pet for and animal feed,
bottled drinks like Wine, Soda, and Water.
Standard carpeted shelf with
variable height lip installed over second row of perforations at
rear. Lip conceals 2" gap that serves as a power and antenna chase
for T.V.'s, VCR's, stereos and other electronic equipment.
Wire shelves for all types of retail
stores can be used for potato chip displays, candy, bread, baked
goods, flowers, potted items, and packaged goods
The metal retainer is designed to
reinforce shelves that have been cut to accommodate structural
support columns. The scrap piece may also be installed for a more
pleasing and finished appearance.
The solution for maintaining
separation of school, office and art supplies. Dividers are 3 3/4"
wide x 7 3/4" high x 6 3/4" deep. The dividers clip into front shelf
perforations. Minimum product width is 6". End dividers are sold
separately and in pairs.
to install wooden canopy sections for any wall or gondola aisle
sections available with lighting fixtures available.
Display hooks to all types of
display shelving or display walls with either pegboard back or a
slatwall type finish
An extremely flexible
merchandising aid. Ideal for displaying long or tall items
vertically in the space at rear of shelf with related small items on
the shelf to promote impulse sales.
Weight capacity is 50% less than a Standard Shelf of same bracket
Smooth pencil polish edges on
top quality glass. Sturdy frame assembly has two position brackets
for flat or 15° down-slope, ideal for gifts, jewelry and optics.
Weight capacity of 40 lb. for Glass Shelf installed on the Glass
Overloading could cause sudden and
catastrophic failure, resulting in possible personal injury.
Front Shelves offer an innovative way to highlight a new
product, a hot sale item or perhaps an entire line of
merchandise and may be used in Madix standard Gondola and Wall
fixtures, in line with SUS or STP Shelves, and a Standard Base
When used to shelve out both sides of an aisle a unique
scalloped effect is attained. This look is an attractive way to
display an array of merchandise.
This displayer exposes the
products at an angle for better visibility. The modified bracket
allows for shelf to be installed in a wide range of slots for
flexible placement. Standard wire fronts or shelf retainers may be
used. Load capacity is 600 lb.
The Transition Upper Shelf is
used with the Transition Base Shelf allowing different shelf sizes
in a single run. Pricing is based on the largest depth dimension in
the part number. Must be used with Transition Base Shelves and
The 1 1/4" tag molding is integrally
formed into the front edge of shelf surface. The shelf may be
displayed flat, 15 degree down-tilt or 30 degree down-tilt. Load
capacity of 200 Lbs.